The "Catseve" & The European Standard.

The Catseye has been tested and certificated to:

BSEN 1463-1:1998 Road Marking Materials-Retroreflecting Road Studs Part 1: Initial performance requirements.

BS EN 1463-2: 2000 Road Marking Materials-Retroreflecting Road Studs Part 2: Road Test.

The tables below gives the full classifications and dimensions as laid down in the standards:

BS EN 1463 - Part 2 Road Test Performance Specifications:

 

Performance for Road Users- Primary Assessment

Class S1

Performance for Road Users -Night-time Visibility

Class R1

 

Type of Roadstud:

 

Classification of roadstud by use

Use = Permanent Roadstud

Type P

Classification of roadstud by reflector

Reflector = Glass

Type l

Classification of roadstud by design

Design = Depressible

Type B

 

Dimensions:

 

Height designed to be above road surface

More than 20mm to 25mm (Max.).

Class H3

Max. Horizontal dimensions exposed to traffic after installation (In the direction of travel)

Length 250mm Width 180mm

Class HD1

 

The relevant certificates are to be found under the heading "Certifications".